The Tokentools Alupulse 315DX Inverter ACDC Pulse Tig Welder is a 415 volt 3 phase full arc control, AC & DC TIG / MMA, HF TIG power source. Loaded with features like high frequency start, up/down slope, adjustable AC frequency, pulse AC, pulse DC, repeat (latch) function, MMA welding you’ve got the ultimate unit designed for precision TIG and MMAW of all weldable materials with a huge 315 Amp output in TIG and 250 Amp output in stick.
In 4T mode you also have the ability to set the start and finish crater currents and use an optional remote amperage control tig torch.
This inverter ACDC pulse tig welding machine also features push button activated HF Arc Ignition and a Gas Solenoid for automatic control of the shielding gas. A super large capacity fan ensures years of high duty cycle operation. Operation is quite straight forward via the easy to use and understand control panel and the steel case will provide superior protection against accidental bumps.
All IGBT transistors are manufactured by Infineon, chosen for their ability to provide dependable power in the toughest of environments. A complete package including a water cooled Tig torch, remote foot control, and gas regulator.
Optional upgrades - Water cooler, remote amp tig torch.
Brief Overview
- New
- Tokentools
- 5 Years Parts & Labour
- 1 x 415 Volt 20 Amp Supply - 3 Phase
- AC Tig Welding
- DC Tig Welding
- DC MMA Welding
- 2T / 4T Trigger Latching
- Adjustable Start Amps
- Adjustable Finish Amps
- Welds Aluminium
- Welds Stainless Steel
- Welds Other Metals
- Adjustable AC Welding Frequency
- Adjustable AC Balance / Cleaning Action
- Pulse Welding Mode
- Adjustable Pulse Width / Duty
- Adjustable Pulse Welding Frequency
- Arc Force
- Post Flow Shielding Gas Timer
- Up Slope
- Down Slope
- Push Button Start HF Ignition
- Preset Amps Control / Display
The inverter welder design is either IGBT or MOSFET
- IGBT - Siemens / Infineon Power Transistors
- L57cm x W31cm x H57cm
- Weight - 35 Kilograms
Tig Welding Features
This is the method of arc ignition. It consists of pushing the start button on the torch to enable an automatic arc strike.
- Push Button Start (HF)
The ability to activate and deactivate shielding gas and also provide post flow
- Electric Solenoid activates when torch trigger is pressed
- Postflow - 0 to 25 seconds
- Preflow - 1 to 25 seconds (Available by pressing torch trigger briefly and activating post flow cycle)
The settings that enable control of the welding waveform
- AC Balance - 20% to 80%
- AC Square Wave Frequency - 10Hz to 300Hz
- AC & DC Pulse Width
- AC & DC Pulse Frequency
- DC Amps 5 to 315
- AC Amps 40 to 315
AC is used for aluminium welding and DC is used for other metals
- AC Square Wave
- DC
Amperage and frequency range available when using pulse welding mode
- Pulse Duty - 10% to 90%
- Pulse Amps AC - 40 to 315
- Pulse Amps DC - 10 to 315
- Both high and low pulse frequency via selector switch
- Pulse Frequency - 0.5Hz to 25Hz
- Pulse Frequency - 20Hz to 500Hz
A feature required if you wish to use a variable amps torch or else a foot pedal
- Yes
- Foot Pedal Compatible
- Variable Amps Torch Compatible
Slope control is used to increase amps over time from crater amps to welding amps (up slope) or from welding amps to final crater amps (down slope)
- Yes
- Up Slope - 1 to 10 seconds
- Down Slope - 1 to 10 seconds
- Available by selecting 4T mode
- Start Crater - 20 to 100 Amps
- Finish Crater - 20 to 100 Amps
MMA Welding Features
- 10 to 250 Amps
Duty Cycles
- 200 Amps @ 100% Duty
- 250 Amps @ 60% Duty
- 315 Amps @ 35% Duty
- 160 Amps @ 100% Duty
- 200 Amps @ 60% Duty
- 250 Amps @ 35% Duty
What is in the box?
- 1 x Alupulse 315DX Inverter Welding Power Supply
- 1 x Binzel Compatible WP18 Series Ergonomic Water Cooled Tig Torch
- 1 x Foot Operated Remote Amp Control
- 1 x 3 Meter MMA Twist Lock Torch and Cable
- 1 x 3 Meter Job Clamp and Cable
- 1 x Reinforced gas Line
- 1 x Tig Torch Accessory Kit
- 1 x Instruction Manual
This welding machine includes a 5 year (60) month warranty against manufacturing faults and defects however the customer has the ability to reduce the warranty period in order to obtain a greater discount. In circumstances where the customer elects to take a 2 Year or 1 Year warranty the 5 Year warranty will no longer apply and instead the selected warranty period along with applicable discount will apply and such direction will be noted on the sales invoice.
Our products are typically despatched from our warehouse on the same day if payment is made before 2PM.
All of our orders are despatched quickly. We don't like you to wait for your purchases. In fact over 90% of deliveries to major metro areas across Australia's East Coast arrive within 2 business days from the day we confirm payment (that's same day for credit card and PayPal orders). West Coast orders take 4 days longer. If you live in a regional area then we suggest you allow up to 4 additional days for your goods to arrive. A tracking number will be emailed to you upon shipping of your product and you will be able to get an ETA delivery date from that source
This welding supply is also available for pickup from our showroom located at Unit 6, 9-11 Willow Tree Rd Wyong NSW 2259 during opening hours. See the pickups information for more details.
No posts found
