List price: $2,599.00
$2,199.00
You save: $400.00 (15%)
MM-ALUSYNC-215
In stock
Buy Now

Product Description

AC DC Tig Welder - The Alusync 200 was an awesome machine however we just wanted to tweak it a bit more. The NEW Alusync 215 is even better and built on the same sturdy and dependable IGBT inverter transistor welding core but with a digital back end and a front panel full of ADC's, Analogue to Digital converters. Fusing the appeal of gentle control via knobs and at a glance settings recognition with accurate digital microprocessor control. We have also adapted some of the features from the Elite and Pro range of machines such as FOD, Fan On Demand. Did we mention the flip up front clear plastic cover that protects the control panel from debris?

 

The new Metalmaster Alusync 215 Inverter ACDC Pulse Tig Welder and Plasma Cutter is a 240 volt, full arc control, AC & DC TIG Welder / MMA Stick Welder, HF TIG power source with integrated 210 Amp Tig and 50 Amp Plasma Cutter. Standard features on this machine include high frequency arc ignition, up and down slope, start amps and crater amperage settings, pre flow, post flow, adjustable AC frequency with a massive 20 to 250Hz range, high and low pulse welding modes, repeat (latch) function, MMA welding and integrated plasma cutter functionality. 

 

The Metalmaster Alusync 215 multi function welder cutter is designed to be an all round product suitable for precision TIG / MMAW and plasma cutting of all weldable materials. The Tig Plasma machine features push button activated HF Arc Ignition and a Gas Solenoid for automatic control of the shielding gas. A large capacity fan that switches on and off when required ensures years of high duty cycle operation. Operation is quite straight forward via the oil /acid resistant membrane control panel and the steel case will provide superior protection against accidental bumps.

 

All IGBT transistors are manufactured by Infineon, chosen for their ability to provide dependable power in the toughest of environments. With the Metalmaster Alusync 215 you will have one inverter TIG MMA welder and plasma cutter ready to attack and conquer any job you put to it.

Product Features & Specification

Brief Overview

Condition:
  • New
Brands:
  • Metalmaster
Warranty:
  • 5 Years Parts & Labour
Power Requirement:
  • 1 x 240 Volt 15 Amp Supply - Single Phase
Welding Process:
  • AC Tig Welding
  • DC Tig Welding
  • Pulse Tig Welding
  • DC MMA Welding
  • Plasma Cutting
At A Glance :
  • 2T / 4T Trigger Latching
  • Pre Flow Shielding Gas Timer
  • Adjustable Start Amps
  • Adjustable Finish Amps
  • Welds Aluminium
  • Welds Stainless Steel
  • Welds Other Metals
  • Cuts all metals
  • Adjustable AC Welding Frequency
  • Adjustable AC Balance / Cleaning Action
  • Pulse Welding Mode
  • Adjustable Pulse Width / Duty
  • Adjustable Pulse Welding Frequency
  • Arc Force
  • Post Flow Shielding Gas Timer
  • Up Slope
  • Down Slope
  • Push Button Start HF Ignition
  • Preset Amps Control / Display
  • Digital Readout
Inverter Type:
  • IGBT - Siemens / Infineon Power Transistors
Dimensions and weight:
  • L50cm x W23cm x H44cm
  • Weight - 25 Kilograms

Plasma Cutting Features

Plasma Cutting Capability:
  • HF arc ignition
  • Cuts all metals
  • Clean cut to 16mm in mild steel
  • Severance cut to 20mm in mild steel
  • Requires 60PSI compressed air
  • Requires 7CFM of compressed air
  • Includes filter / dryer (water trap)
  • Rear Mounted Air Pressure Gauge

Tig Welding Features

Arc Ignition:
  • Push Button Start (HF)
Gas Control:
  • Electric Solenoid activates when torch trigger is pressed
  • Preflow - 0 to 10 seconds
  • Postflow - 0 to 25 seconds
Waveform Control:
  • AC Square Wave Frequency - 20Hz to 250Hz
  • AC Balance - 10% to 90%
  • AC & DC Pulse Width
  • AC & DC Pulse Frequency
Tig Welding Amps Range:
  • DC Amps 5 to 210
  • AC Amps 10 to 210
Tig Welding Waveform:
  • AC Square Wave
  • DC
Pulse Welding Features:
  • Pulse Duty - 10% to 90%
  • Pulse Frequency - 0.5Hz to 25Hz
  • Pulse Frequency - 25Hz to 250Hz
Remote Amps Control Capable:
  • Yes
  • Foot Pedal Compatible
  • Variable Amps Torch Compatible
Slope Control:
  • Down Slope - 1 to 25 seconds
  • Yes
  • Up Slope - 1 to 10 seconds
Crater Current:
  • Start Amps - 5 to 210 Amps DC Welding
  • Finish Crater - 10 to 200 Amps

MMA Welding Features

MMA Welding Amps Range:
  • 10 to 170 Amps
MMA Current Waveform Control:
  • DC

Duty Cycles

Tig Welding Duty Cycles:
  • 160 Amps @ 100% Duty
  • 210 Amps @ 60% Duty
MMA Welding Duty Cycles:
  • 100 Amps @ 100% Duty
  • 140 Amps @ 60% Duty
  • 160 Amps @ 35% Duty
Plasma Cutter Duty Cycles:
  • 30 Amps @ 100% Duty
  • 50 Amps @ 60% Duty

What is in the box?

All items listed are included in the standard package:
  • 1 x Alusync 215 Inverter Welding Cutting Power Supply
  • 1 x 4 Metre 60 Series Ergonomic Plasma Cutting Torch
  • 1 x 4 Metre Binzel Compatible 26 Series Ergonomic Tig Torch
  • 1 x 3 Meter MMA Twist Lock Torch and Cable
  • 1 x 3 Meter Job Clamp and Cable
  • 1 x Reinforced gas Line
  • 1 x Filter Dryer (Water Trap)
  • 1 x Plasma Torch Accessory Kit (5 tips, 5 electrodes, 3 ceramic shields)
  • 1 x Tig Torch Accessory Kit
  • 1 x Instruction Manual