Welding Positioner 100Kg 350mm Table - ROTA350

The ROTA350 welding positioner can benefit you if you are looking to increase your speed of fabrication and weld finish on circular objects as it will allow the work piece to rotate around an axis whilst welding operations are undertaken.

A robust unit featuring a digital programmable controller that will control the rotational angle, the dwell time and repeat. Need to weld 45 rotational degrees? No problem, just key it in and push down on the foot control. Whilst you are welding the controller measures out the 45 degree rotation and stops. You can also use the input trigger button to start the rotation cycle if your foot is busy with the welder's remote pedal.

With the ROTA350 the operator has a consistent weld without the need to move the torch around the job. The same applies if you want to weld around the perimeter of a circular object. The controller supports angles from one degree up to thousands of degrees (multiple revolutions). Dwell time enables you to set up a predetermined rest period between rotational segments. For example you could rotate for 30 degrees and then stop for 20 seconds before repeating. The rotator is capable of supporting 100 kilograms whilst in the horizontal position or 50 kilos whilst vertical. Please note any load must be uniformly balanced to avoid overloading the motor or motor driver components when rotating

There are many adjustments available on the ROTA350, to lock the table into an inclined position between horizontal and vertical. Connection of your workpiece is achieved via the Dinse 35-70 socket on the rear, a plug is supplied with the unit to enable easy connection to your existing welder. Speed is adjustable via the front mounted potentiometer which supplies a pulse width modulated signal to the high torque motor / gearbox combo. Rotational direction is set via a toggle switch and triggering of the rotating mode can be achieved with the supplied foot control or the front panel mounted push button switch.

Interfacing with your welding equipment is possible as the ROTA350 positioning machine features a set of dry contacts and closes the contact when operating so you could connect it to a MIG or TIG welding machine and have it weld whilst the machine is operating. A plug is also provided with the rotator. The staff at Tokentools can assist you with this if required, bespoke solutions are one of our specialties.