Tig Welders

Our inverter Tig welders for sale are the finest examples of new Tig welding machines. You can buy an ACDC Tig welder for welding aluminium, a DC tig welder for steel or a multi-process tig welding machine with integrated plasma cutter.  There is a feature comparison table for all inverter welding machines and you can compare shop prices before you buy online. All Gas Tungsten Arc Welders GTAW are in stock and ready to ship. For more information about our Tig machines and GTAW process please see our tig welding guide.

< < < < < <
lift arc tig welders dc tig welders acdc tig welders multi-process tig arc welders plasma cutters

Lift Arc Tig Welders


DC Tig Welders


AC DC Tig Welders


Multi Process Tig Welders


pulse tig welder acdc digital tig welder    

Pulse Tig Welders


Digital Tig Welders


   
Inverter Arc Welder - 200 Amps - DC Lift Arc Tig - Miniarc 205 STL

CODE: Miniarc205STL

$799.00   $299.00
-63%
In stock

The Tokentools Miniarc 205 STL  is a portable inverter MMA / Stick and TIG welder weighing just 9.0 Kilograms. The first version of this welder was... More 


Inverter Arc Welder - DC Lift Arc Tig - Miniarc 142ST

CODE: Miniarc142ST

$549.00   $329.00
-40%
In stock

The Tokentools Miniarc 142ST (Version 3) is a portable inverter MMA / Stick and TIG welder weighing just 5.0 Kilograms. This first version of this welder... More 


Tig Welding Water Cooler - Tig Torch Cooler - Tig Cooling System TTCOOL1

CODE: TTCOOL1

$789.00   $599.00
-24%

The Tokentools TIG water cooler is a TIG welding accessory that serves to remove heat from the TIG welding torch. A TIG welding water cooler is required for welding processes that typically exceed 150 amps for long durations of time. The machine is comprised of an Italian motor that has a fan and brass impeller pump at opposing ends. The pump takes water from a storage tank and pumps it through your water cooled TIG welding torch before returning it via the rear mounted radiator coil. After the water is cooled it returns to the storage tank and the process repeats.  Connection to the TIG welding torch is via two quick disconnect fittings which are supplied with the package are easy to install to any tig welders torch. The barbs are designed to accomodate a TIG torch water line of 5mm inner diameter. The machine is independant of your welder so it can be used with any brand welder and Tig Torch. Please check our TIG welder torch section for a suitable WP18 water cooled torch if you do not already own one.


DC Pulse Tig Welder 160Amps - Tokentools TIG160P

CODE: TIG160P

$928.00   $699.00
-25%
In stock

A fully capable DC pulse Tig welder, the Tokentools TIG160P is a 240 volt full arc control, DC TIG / MMA, HF TIG welding power source. Loaded with features like high frequency start, up/down slope, pulse DC welding, adjustable pulse frequency, repeat (latch) function and MMA welding you’ve got the ultimate unit designed for precision TIG and MMAW of all DC weldable materials. This DC pulse Tig welding machine features push button activated HF Arc Ignition and a Gas Solenoid for automatic control of the shielding gas. A high speed fan provides abundant cooling for years of high duty cycle operation. Operation is quite straight forward via the easy to understand control panel and the steel case will provide superior protection against accidental bumps. All IGBT transistors are manufactured by Infineon, chosen for their ability to provide dependable power in the toughest of environments.


Multiprocess DC Tig Welder Plasma Cutter 160Amps - Tokentools Multi164

CODE: MULTI164

$1,049.00   $789.00
-25%
In stock

A multiprocess machine containing a DC Tig welder, Stick Welder and Pilot Arc Plasma Cutter,  the Tokentools Multi164 universal 3 in 1 machine is a must have tool where portability or space are of critical importance. The Tokentools Multi164 operates from a 240 volt 15 amp power outlet and is an ideal machine for those with limited space where one machine can replace 3 such as filed service vans or small workshops.  Boasting features such as high frequency start, MMA welding and plasma cutter functionality you’ve got the ultimate unit designed for precision TIG / MMAW welding of steels and plasma cutting of all metals. The machine features push button activated HF Arc Ignition and a Gas Solenoid for automatic control of the shielding gas.


Mig Welder Multiprocess 3in1 MTS Mig Tig Stick - Tokentools MIG200

CODE: TTMIG200

$1,299.00   $849.00
-35%
In stock

An inverter multiprocess mig welder, the Tokentools MIG200 is a 240 volt MIG, TIG and MMA ARC Welder rolled into one lightweight package. Also known as an MTS (Mig Tig Stick) welder, this machine features DC MIG / DC MAG, DC TIG, DC MMA ARC with reversible polarity for gas and gasless mig wire use. The constant voltage (CV) and constant current (CC) power source is made possible by a high efficiency 25 kiloherz IGBT quad core inverter matrix and the wire drive is smoothly driven by a pulse width modulated controller and features twin rollers with a metal gearbox. Other benefits are the digital volts display, digital amps display, over 100 voltage selections in 0.1 volt increments, in short you’ve got the ultimate unit designed for precision MIG MAG TIG and MMAW applications for all weldable materials.


DC Pulse Tig Welder 200Amps - Tokentools TIG200P

CODE: TIG200P

$1,399.00   $899.00
-36%
In stock

A fully capable DC pulse Tig welder, the Tokentools TIG200P is a 240 volt full arc control, DC TIG / MMA, HF TIG welding power source with a little more grunt than it's smaller sibbling. Loaded with features like high frequency start, up/down slope, pulse DC welding, adjustable pulse frequency, repeat (latch) function and MMA welding you’ve got the ultimate unit designed for precision TIG and MMAW of all DC weldable materials.


Mig Welder Multi-Process MIG210D

CODE: TTMIG210D

$1,499.00   $999.00
-33%

A multiprocess inverter mig welding machine, the Tokentools Metalmaster MIG210D is a digital controlled 240 volt MIG, TIG and MMA ARC Welder. This mig welding machine features DC MIG / DC MAG, DC LIFT ARC TIG, DC MMA ARC with reversible polarity for gas and gasless mig wire use. The Metalmaster 210D can bu used for aluminium welding also. This constant voltage (CV) and constant current (CC) power source is made possible by a high efficiency 25 kiloherz IGBT quad core inverter matrix and the wire drive is smoothly driven by a pulse width modulated controller which features twin rollers enclosed within a metal gearbox. Other benefits include the push button mode selections, the ability to save presets into memory, automatic current throttling that cuts in at 210 Amps, digital volts display, digital amps display, over 120 voltage selections in 0.1 volt increments. For work where the Mig torch cannot reach simply connect the optional spool gun available in 5m or 8m lengths.


Synergic Mig Welder Multi-Process MIG210S

CODE: TTMIG210S

$1,748.00   $1,149.00
-34%
In stock

A Synergic Mig Welder, the Tokentools Metalmaster MIG210S is a digital controlled 240 volt Synergic MIG, TIG and MMA ARC welding machine. So what is a Synergic Mig welder and how can you benefit? Synergic Mig welding machines provide incremental current pulses which form small droplets of similar sized molten material on the tip of the Welding wire combined with the other specific relationships necessary for stable wire burn off. These droplets detach and fall into the weld pool. Incremental current pulses are unique to a given material and wire diameter and their details are programmed into the synergic welder control board. In practical terms, this allows an operator to pre-select wire material and diameter once for any welding operation, then adjust the one control that governs wire feed rate. Adjustments made by the operator are then displayed as an amperage setting providing easy interpretation of the amout of energy being supplied to the welding wire. The ‘one knob’ operation synonymous with this type of power source is the principal advantage of such a system compared to conventional non-synergic sets that require independent volts and wire speed settings that cannot be interpreted as amperage without complex calculations.


AC DC Pulse Tig Welder 200 Amps - Tokentools Alupulse200

CODE: ALUPULSE200

$1,999.00   $1,399.00
-30%
In stock

The Tokentools Alupulse 200 Inverter ACDC Pulse Tig Welder is a 240 volt full arc control, AC & DC TIG / MMA, HF TIG welding power source. Loaded with features like high frequency start, up and down slope, adjustable AC frequency with a massive 10 to 300Hz range, repeat (latch) function, MMA welding functionality you’ve got the penultimate unit designed for precision AC DC TIG / MMAW welding of all weldable materials.


AC DC Pulse Tig Welder 200Amps & Plasma Cutter 40Amps - Tokentools Alusync200

CODE: ALUSYNC

$2,199.00   $1,599.00
-27%

The Tokentools Alusync 200 Inverter ACDC Pulse Tig Welder and Plasma Cutter is a 240 volt, full arc control, AC & DC TIG / MMA, HF TIG power source with integrated Plasma Cutter. Standard features on this machine include high frequency arc ignition, up and down slope, adjustable AC frequency with a massive 10 to 300Hz range, repeat (latch) function, MMA welding and integrated plasma cutter functionality.




Metalmaster 256 Multi-Process ACDC Digital Pulse Tig Plasma Welding Plant

CODE: 256 ELITE DIGITAL

$3,299.00   $2,149.00
-35%
In stock

The Metalmaster 256 Elite is the higher amperage counterpart to our 215 model. The 256 Elite Digital is a multi-process ACDC Tig welder & plasma cutter... More 


Tokentools Inverter AC DC Pulse Tig 315 Amps

CODE: ALUPULSE315DX

$3,490.00   $2,499.00
-28%
In stock

The Tokentools Alupulse 315DX Inverter ACDC Pulse Tig Welder is a  415 volt 3 phase full arc control, AC & DC TIG / MMA, HF TIG power source. Loaded with features like high frequency start, up/down slope, adjustable AC frequency, pulse AC, pulse DC, repeat (latch) function, MMA welding you’ve got the ultimate unit designed for precision TIG and MMAW of all weldable materials with a huge 315 Amp output in TIG and 250 Amp output in stick.

 
Loading...