Synergic

Synergic Mig Welders use a few smarts to make the mig process more operator friendly. Synergic mig machines contain wire data such that the operator simply selects the wire type, wire thickness and the machine will convert the arc voltage and wire speed into a single amperage control. In other words, you only need to turn the amps knob to increase the weld heat, your synergic welder will take care of arc voltage and wire speed.

 

If however you like to fiddle, don't worry as there are also manual overide modes where you can tweak every setting.

Save 16% Synergic Mig-Welder-Metalmaster-210S
4.7500 228
Friday, March 22, 2024 $1,848.00 1549 $1,549.00

A Synergic Mig Welder, the Tokentools Metalmaster MIG210S is a digital controlled 240 volt Synergic MIG, TIG and MMA ARC welding machine. So what is a Synergic Mig welder and how can you benefit? Synergic Mig welding machines provide incremental current pulses which form small droplets of similar sized molten material on the tip of the Welding wire combined with the other specific relationships necessary for stable wire burn off. These droplets detach and fall into the weld pool. Incremental current pulses are unique to a given material and wire diameter and their details are programmed into the synergic welder control board. In practical terms, this allows an operator to pre-select wire material and diameter once for any welding operation, then adjust the one control that governs wire feed rate. Adjustments made by the operator are then displayed as an amperage setting providing easy interpretation of the amout of energy being supplied to the welding wire. The ‘one knob’ operation synonymous with this type of power source is the principal advantage of such a system compared to conventional non-synergic sets that require independent volts and wire speed settings that cannot be interpreted as amperage without complex calculations.

In stock