Welding Clamps used for tightly clamping down the work piece to a welding table in order to obtain an accurate weld.
The Stronghand EZ Grip Ratchet Welding Clamp is so easy to use with it's patented ratchet mechanism and super fast clamping action. Stick it on the workpiece and give the ratchet two taps for glue like adhesion of two peices ready to be welded. The maximum clamping pressure is 120 kilograms of force, the throat is 76mm deep and the overall length of the ratchet clamp allows a capacity of 419mm. The hardened steel slide rail is 19mm x 6mm.
The locking welders C Clamp from Stronghand Tools is great for quick setup for your welding jobs. A quick press of the handles and engagement of the red locking lever will clamp this tool tightly onto the work piece helping to hold the two surfaces to be welded securely and safely.
Shark clamps are a type of fast set up clamping system benefiting from a sharp pitch thread for extreme clamping force and a half nut that disengages to allow rapid opening and closing without the need to turn the T handle.
The PA634 Jointmaster adjustable angle clamp is a terrific welding tool for holding your workpiece in place at any angle that you require. Fast, precise and affordable clamping tools for corners and T-joints.
No data found
Unit 6 / 9-11 Willow Tree Rd WYONG, NSW 2259
Tuesday - Friday | 9 am — 3 pm East Coast
© 1998-2019 Tokentools Welding Equipment Supplies. Powered by Welding Supplies