Gas connectors that can be used on Tokentools & Metalmaster welding machines for inlet and outlet gas supply.
These Metalmaster gas line adjustable hose clamps are available from your local hardware store also however if you are not inclined to go for a walk we can post them out to you.
A Metalmaster Spare Part, this male barb that is designed to mate with a quick disconnect female coupling will suit many applications beyond welding. Spare parts for your welding machine.
A quality Metalmaster spare part, the screw on gas connector is suited to threaded front and rear panel mount gas line interfaces. The gas line slips over the barb and the locking spline then reverse threads over the gas line to lock it in. The hex nut is then fitted to the threaded barb on your equipment and tightened.
A quality Metalmaster spare part, the screw on gas connector is suited to threaded front and rear panel mount gas line interfaces in size M16 x 1.5mm. The gas line slips over the 6.5mm barb and you can use a clamp to secure it. The hex nut is then fitted to the threaded barb on your equipment and tightened.
A Metalmaster Spare Part, this female quick disconnect coupling may be panel mounted or directly hose mounted. By using the corresponding male barb you can easily set up a quick disconnect hose system which facilitates trouble free tig / plasma changes on muti process welding machines.
Unit 6 / 9-11 Willow Tree Rd WYONG, NSW 2259
Mon-Fri 9AM to 4PM
© 1998-2020 Tokentools Welding Equipment Supplies. Powered by Welding Supplies