MM-MIG250P
5 Year Warranty on Welders For Sale on This Site
Online welding supplies Australian owned and operated

List price: $3,290.00

Friday, March 22, 2024 $2,599.00

You save: $691.00 (21%)

Add to wish list Add to comparison list
We no longer sell this product
5 y warranty 2 year warranty 1 year warranty
no mig welding ally kit mig welding ally kit

A multiprocess single phase 250 Amp inverter pulse mig welding machine , the Tokentools Metalmaster MIG250P is a digital controlled 240 volt Pulse MIG, Pulse TIG and MMA ARC Welder. This welding machine features DC Pulse MIG / DC MIG, DC LIFT ARC Pulse TIG, DC LIFT ARC TIG, DC MMA ARC welding processes. Additional features are stitch and spot timers for mig welding, reintroduced due to popular demand. With reversible polarity for gas and gasless mig wire use the Metalmaster 250P can be used with or without shilding gasses and the pulse welding feature makes it an ideal machine for aluminium welding.

 

The powerful output of this constant voltage (CV) and constant current (CC) power source is made possible by the proven reliability of our high efficiency 25 kiloherz IGBT quad core inverter matrix. The wire drive is smoothly driven by a pulse width modulated controller which features twin rollers enclosed within a metal gearbox. Other benefits include the push button mode selections, the ability to save presets into memory, automatic current throttling that cuts in at 250 Amps, digital volts display, digital amps display, hundreds of voltage selections in 0.1 volt increments. For thin sheet work or where the Mig torch simply cannot reach our optional spool gun is available in 5m or 8m lengths.

 

Pulse MIG welding has been simplified by allowing the operator quick access to the most recent setting so micro adjustments may be made on the fly. Different from standard MIG welding, the pulse feature allows two voltage characteristics, a ratio between them and a rate of repetition.

 

Peak Volts - The upper voltage that is used to provide penetration.

Base Volts - The lower voltage that is used to maintain the arc whilst allowing the material to cool.

Pulse Ratio - The amount of ratio of pulse vs base. Increasing this value gives more pulse / heat.

Pulse Frequency - The repetition rate of the pulse cycle. A value of 10Hz will provide 10 pulses per second.

 

Pulsed MIG welding can be used for joining both thick and thin sections of aluminium. During the pulse weld process on thicker material, a cooler weld puddle is formed when compared to the traditional spray transfer process, making it usable in all positions.           
 
Thinner sections of aluminum benefit by the reduced risk of burn-through and warping by controlling the heat input very accurately. This control often allows for the use a larger diameter wire up to 1.2mm, which increases the rate of wire deposition and productivity. The welding operator can lay more weld metal into the joint imuch faster all without adding excessive amounts of heat. Pulsed MIG welding can also allow for faster wire feed and travel speeds, again increasing productivity, while simultaneously turning down the heat input leading to decreased residual stress and distortion. 

 

For Tig welding processes simply connect the supplied TIG torch and press the push button trigger to activate the power output along with shielding gas, you are then ready to perform smooth lift arc TIG welding operations. When the operator touches the tungsten electrode to the workpiece the output current is reduced to only a few amps and this process avoids tungsten stick, the unfortunate result that occurs when Tig welding with a standard stick welder.Upon lifting the tungsten electrode away from the workpiece, the 32 bit microprocessor rapidly reacts and increases the current within milliseconds thereby establishing a strong Tig welding arc. The arc is further manipulated based on Tig mode, either standard or pulse. As with the Pulse MIG welding process, Pulse TIG welding provides a similar benefit for thick and thin material sections.

 

Huge MMA stick welding capacity is available and at 200 Amps DC, puts this 26 kilogram welding power source in the same league as Granpah's 300 kilo, 280 Amp buzz box AC arc welder. With arc force, hot start amps and hot start time, benefit from 21st century features with the confidence of owning a product backed by an industry leading 5 year warranty.

 

Away from mains? Generator use is assured but a 10 Kva unit with AVR (automatic voltage regulator) is a must. A large capacity fan ensures years of high duty cycle operation. An easy to use membfane control panel and steel case will provide superior protection against accidental bumps. All IGBT transistors are manufactured by Infineon, chosen for their ability to provide dependable power in the toughest of environments. Designed for precision PULSE MIG MAG TIG and MMAW applications for all weldable materials we believe this product is being offered at a price point that is affordable and a warranty that is market leading.

Brief Overview (More Info)

Condition:
  • New
Brands:
  • Metalmaster
Warranty:
  • 5 Years Parts & Labour
Power Requirement:
  • 1 x 240 Volt 15 Amp Supply - Single Phase
Welding Process:
  • DC Tig Welding
  • Pulse Tig Welding
  • MIG Welding
  • Pulse Mig Welding
  • DC MMA Welding
At A Glance :
  • Pre Flow Shielding Gas Timer
  • Welds Aluminium in MIG mode only
  • Welds Stainless Steel in MIG or TIG modes
  • Welds Other Metals Excluding Aluminium in TIG mode
  • Welds Other Metals Including Aluminium in MIG mode
  • Pulse Welding Mode
  • Adjustable Pulse Width / Duty
  • Adjustable Pulse Welding Frequency
  • Arc Force
  • Hot Start Amps
  • Hot Start Time
  • Post Flow Shielding Gas Timer
  • Preset Amps Control / Display
  • Stitch Timer Function
  • Spot Timer Function
  • Burnback Adjustment
  • Inductance Adjustment
  • Digital Memory
Inverter Type :
  • IGBT - Siemens / Infineon Power Transistors
Dimensions and weight:
  • L57cm x W23cm x H37cm
  • Weight - 26 Kilograms

Mig Welding Features

Supported Spools:
  • 200 mm Spool (also known as 5 kilo for steel wire)
Mig Welding Amps Range:
  • 30 to 250
Mig Welding Voltage Range:
  • 14 to 30 Volts DC
  • Adjustable in 0.1V increments ( For faster adjustment, push adjuster knob whilke turning to increase adjustment to 1V increments)
Gas & Gasless Use:
  • Yes - Adjustable Polarity
  • +ve electrode for gas and aluminium
  • -ve electrode for gasless wires
Mig Wire Feed Rate:
  • 0.1 to 15 Metres Per Minute
Burnback:
  • Yes
Pulse Settings:
  • Pulse Voltage - 14V to 30V
  • Base Voltage - 14V to 30V
  • Pulse Duty - 10% to 90%
  • Pulse Frequency - 10hz to 250hz
Wire Drive Rollers:
  • 0.6mm / 0.8mm V Groove x 30mm Diameter - Included
  • 1.0mm / 1.2mm U Groove x 30mm Diameter - Optional
Spot & Stitch Timers:
  • Spot Time 0.1 to 15 Seconds
  • Stitch Time 0.1 to 15 Seconds

Tig Welding Features (More Info)

Arc Ignition :
  • Touch Lift Arc Start
Gas Control :
  • Electric Solenoid activates when torch trigger is pressed
  • Preflow - 0 to 5 seconds
  • Postflow - 1 to 10 seconds
Waveform Control :
  • DC Pulse Width
  • DC Pulse Frequency
Tig Welding Amps Range:
  • DC Amps 20 to 250
Tig Welding Waveform :
  • DC
Pulse Welding Features :
  • Pulse Amps DC - 10 to 250
  • Pulse Duty - 10% to 90%
  • Base Amps DC - 10 to 250
  • DC Pulse Frequency - 0.1Hz to 500Hz
Remote Amps Control Capable :
  • No

MMA Welding Features (More Info)

MMA Welding Amps Range:
  • 10 to 200 Amps
MMA Current Waveform Control :
  • Arc Force
  • DC
  • MMA - No VRD Fitted
  • Hot Start Amps
  • Hot Start Amps Time

Duty Cycles

Mig Welding Duty Cycles:
  • 160 Amps @ 100% Duty
  • 200 Amps @ 60% Duty
  • 250 Amps @ 35% Duty
Tig Welding Duty Cycles:
  • 160 Amps @ 100% Duty
  • 200 Amps @ 60% Duty
  • 250 Amps @ 35% Duty
MMA Welding Duty Cycles:
  • 130 Amps @ 100% Duty
  • 160 Amps @ 60% Duty
  • 200 Amps @ 35% Duty

What is in the box?

All items listed are included in the standard package:
  • 1 x Metalmaster 250P Inverter MTS Welding Power Supply
  • 1 x 3 Metre MB 25 Binzel Mig Torch
  • 1 x 4 Metre Binzel Compatible 26 Series Ergonomic Tig Torch
  • 1 x 3 Meter MMA Twist Lock Torch and Cable
  • 1 x 3 Meter Job Clamp and Cable
  • 1 x Reinforced gas Line
  • 1 x Mig Accessory Kit (Tip spanner + 2 spare tips)
  • 1 x Tig Torch Accessory Kit
  • 1 x Instruction Manual

 

 

 

 

 

 

MIG250P Manual

 

This product manual is provided in a high resolution format for easy internet download and viewing, the file size is 39 Megabytes, click on the image above to begin the download process.  A colour printed manual is provided with the welding machine also.

 

Warranty

This welding machine includes a 5 year (60) month warranty against manufacturing faults and defects however the customer has the ability to reduce the warranty period in order to obtain a greater discount. In circumstances where the customer elects to take a 2 Year or 1 Year warranty the 5 Year warranty will no longer apply and instead the selected warranty period along with applicable discount will apply and such direction will be noted on the sales invoice.

 

Delivery

Our products are typically despatched from our warehouse on the same day if payment is made before 2PM.

All of our orders are despatched quickly. We don't like you to wait for your purchases. In fact over 90% of deliveries to major metro areas across Australia's East Coast arrive within 2 business days from the day we confirm payment (that's same day for credit card and PayPal orders). West Coast orders take 4 days longer. If you live in a regional area then we suggest you allow up to 4 additional days for your goods to arrive. A tracking number will be emailed to you upon shipping of your product and you will be able to get an ETA delivery date from that source

This welding supply is also available for pickup from our showroom located at Unit 6, 9-11 Willow Tree Rd Wyong NSW 2259 during opening hours. See the pickups information for more details.

 

 

$70.00 $39.90
+
$17.99 $12.70
+
$6.00 $4.00
+
$40.00 $35.00
+
$28.00 $14.00
+
$70.00 $25.00
+
MIG Nozzle Dip Gel 400G
WC-9-NDG
$28.51 $21.30
+
$51.00 $28.00
We no longer sell this product
$40.00 $30.00
+
$40.00 $30.00
+
$95.00 $82.00
+
$24.00 $18.80
+
$63.00 $27.00
+
$80.00 $50.00
+
$80.00 $50.00
+
Short Tig Torch Back Cap #17,#18,#26
Back-Cap-Short-171826
$8.00 $4.00
+
$62.00 $51.50
+
After a few months of use i love this welder. Pulse mig on a 240v machine is a real asset in a home workshop for ally when paired with a spool gun. Pulse tig has been excellent on thin the stainless handrails and fittings i work with.
Very high quality torches, conections, earth lead and a user friendly but pro grade interface with a wide range of settings.
I bought this over the better known brands primarily for the pulse mig function but have really enjoyed learning to tig weld. I wont ever need to upgrade from this setup.
Even the powdercoat on the case is really nice compared to cigweld, unimig etc.
Token tools customer service is second to none and i am browsing their catalogue for a plasma cutter in the near future.
Absolutely amazing have welded a lot of aluminium over the years the pulse feature just takes away most of the headaches of too hot or too cold, makes life a bit simpler
I have burned through two rolls of ally and so far so good. I am happy with the machine and thanks to the staff for the fast delivery. The whole process was easy and I would recomend token tools to others. Only thing I would change is have a bigger trolley for it.
Used it for the last 2 days and love it. Blows holes in 5 mil and plenty of grunt. Do you have any push pull guns?
Write a review